Optimize Workability Wetting Dispersing Agent For Cement Repair Mortars

Optimize Workability with Wetting Dispersing Agent for Cement Repair Mortars

Product type:

Createn Wet500 is a powdered non-ionic surfactant with efficient substrate wetting, leveling, flowing, viscosity reducing and dispersing capabilities. The unique chemical structure of Createn Wet500 allows it to quickly wet solid surfaces in cement-based systems, easily disperse and improve the workability of the entire system.

Application scope

Createn Pt550 is used in cement and non-cement systems, including but not limited to:
• Self-leveling surface layer and underlayment
• Cement screed
• Repair mortar
• Bonding mortar
• Sleeve grouting
• Tile adhesive
• External wall insulation
•UHPC

Technical advantages:
• Rapidly wets solid particles (including cements, fillers, fibers and pigments)
• Reduce dispersion time
• Improve mix uniformity
• Improve the fluidity of flowing products (flowing mortars)
• Extend working hours and improve workability
• Effective defoaming
• Improved adhesion
• Increased pumping speed and productivity
• Easy-flowing powder with low dust emission
• Low VOC, suitable for EMICODE EC1 PLUS system
• No added silicone and APEO

Use and dosage

For specific applications, the dosage can vary within the range of 0.05-0.2% (based on the total weight of the dry mix). It is recommended to conduct screening tests in advance to determine the appropriate dosage. Createn Wet500 mixes very easily with other dry mixes.

store

Createn Wet500 can be stored for 18 months in sealed packaging under dry conditions not exceeding 35 degrees Celsius (95 degrees Fahrenheit).

Packaging: 25kg/paper bag

Illustrate

Please refer to the safety technical manual for the following points:
·Classification and labeling of transportation and hazardous materials
·Protective measures during storage and use
·Measures in case of accidents and fires
·Toxicology and ecotoxicity